made-in-sa-logo
ats-2000-bevel-header

G4 Pneumatic Vertical & Horizontal Grinders

ATS 2000 Pneumatic Grinder

THE SOLUTION TO OVER SPEED AND GREATER SAFETY

The greatest hazard condition of a Pneumatic Vertical & Horizontal Grinders is caused by over speed. 90% of over speed occurs in the off load condition. Malfunction due to wear and tear on the speed controller, which then allows the grinding wheel to run to speeds higher than the safety limits of the grinding wheel resulting in wheel failure disintegration and injury.

TURBO G4 – RAPID RESPONSE SPEED CONTROLLER

HOW IT WORKS

The TURBO G4 bursts into life the second you switch on the safety lock throttle, running to the maximum safe permissible speed of the wheel. When the slightest load is applied the speed controller senses this and responds by increasing airflow with only a 3% reduction in speed under full load. Conventional speed controllers reduce speed by between 12% and 20% speed reduction under full load result in reducing power output, production and wheel life potential. Another great feature of the grinder’s speed controller is decreased motor speed with any increase in air pressure above design 6.2bar pressure (90psi), which is unique to the Turbo G4 rapid response governor.

SAFETY BENEFITS

  •  Greater safety because the motor speed does not increase with increase in air pressure
  •  Greater safety as speed controller works in unison that is there are no stationary components acting against rotating components resulting in longer life of this vital assembly
  •  Safety lever on throttle eliminates accidental activation

AIR CONSUMPTION BENEFITS

  • Lower over-all consumption is achieved due to super-efficient motor and governor design.

OTHER UNIQUE FEATURES

  •  Lubrication-free technology
  •  Excellent spares and service backup
  •  BEST IN CLASS – Low weight and excellent power to weight ratio
  •  Handles are ergonomically angled to reduce operator fatigue
  •  Side-to-centre of body equals backing discs side-to-centre allowing full wheel potential for back grinding and cutting off operations
  •  Safety lock throttle levers as standard
  •  Detachable handles and motor cap for lower maintenance costs
  •  Wide governed speed range: max 10200rpm – 3000rpm (ungeared) direct drive
  • Proudly designed and manufactured in South Africa

pdf-icon-20pxClick here to download a copy of this brochure.

 

Please note that ATS 2000 are prepared to adapt
our grinder to other applications that you may have!

VERTICAL
HORIZONTAL
AVERAGE AIR CONSUMPTION: 80 CFM ON MAX. LOAD /32 CFM ON IDLE AVERAGE AIR CONSUMPTION: 80 CFM ON MAX. LOAD/32 CFM ON IDLE
AVERAGE AIR CONSUMPTION ON LOAD: 55 CFM AVERAGE AIR CONSUMPTION ON LOAD: 55 CFM
WEIGHT: 3.6Kg WEIGHT: 5.0Kg
HEIGHT : 200mm LENGTH : 556mm
SIDE TO CENTRE: 52mm RADIUS (50% UNRESTRICTED ON OPEN END OF GUARD) HOUSING EXTENSION : 95mm x 50mm DIA
SIDE TO CENTRE: 52mm RADIUS (50% UNRESTRICTED ON OPEN END OF GUARD)
SPINDLE THREAD: 5/8” BSW SPINDLE THREAD: 5/8” BSW
POWER OUTPUT: 3Kw (4HP) POWER OUTPUT: 3Kw (4HP)
Model No.
RPM
Wheel Size
Description
G4-V230-DCD 6500 230mm (9″) DEPRESSED CENTRE DISC
G4-V230-COD 6500 230mm (9″) CUT OFF DISC
G4-V125-RCW 6500 125mm(5″) RESINOID CUP WHEEL
G4-V150-RCW 6000 150mm (6″) RESINOID CUP WHEEL
G4-V230-SD 4500 230mm (9″) SANDING DISC.
G4-V150-VCW 3100 150mm (6″) VITREFIDE CUP WHEEL (STONE MASON)
G4-V150-CWW 4500 150mm (6″) CUP WIRE WHEEL
G4-V180-DCD 8500 180mm (7″) DEPRESSED CENTRE DISC
G4-V180-COD 8500 180mm (7″) CUT OFF DISC
G4-V180-SD7 7000 180mm (7″) SANDING DISC
G4-V180-PWB 3100 180mm (7″) POLISHING WHEEL BUFF
G4-V180-SD6 6000 180mm (7″) SANDING DISC
G4-V180-SD45 4500 180mm (7″) SANDING DISC
Model No.
RPM
Wheel Size
Description
G4-H230-DCD 6500 230mm (9″) DEPRESSED CENTRE DISC
G4-H230-COD 6500 230mm (9″) CUT OFF DISC
G4-H200-RBW 4500 200mm (8″) RESIN BONDED WHEEL
G4-H200-RBW 6000 150mm (6″) RESIN BONDED WHEEL
G4-H150-FRB 10200 150mm (6″) FIBRE RESIN BOND WHEEL
G4-H100-CONE 8500 100mm (4″) THREADED CONE WHEEL
G4-H250-FW 3000 250mm (10″) FLAP WHEEL
G4-H200 FW 3000 200mm (8″) FLAP WHEEL
G4-H150FW 4500 150mm (6″) FLAP WHEEL
G4-H180-DCD 8500 180mm (7″) DEPRESSED CENTRE DISC
G4-H180-COD 8500 180mm (7″) CUT OFF DISC
G4-H200-PWB 3000 200mm (8″) POLISHING WHEEL BUFF
ATS 2000
Assign a menu in the Left Menu options.